Square Foot Calculator
Tips

Price per square foot: how to compare homes, flooring and quotes

Two listings: $412,000 for 1,850 square feet, and $455,000 for 2,100 square feet. The second house costs $43,000 more and still comes out cheaper per foot. Price per square foot is one division, and it is the number everyone quotes, but it only means something when both prices and both areas are measured the same way. Here is how to use it for homes, flooring and contractor quotes without getting fooled.

General information only, not financial or appraisal advice: check figures with your agent, appraiser or contractor. For any area you measure yourself, the square foot calculator adds rooms, subtracts cut-outs and compares two quotes, A and B, by price per square foot; leave area A empty and it uses your project total.

The formula, both directions

price per ft² = total price ÷ area in ft²
total price = price per ft² × area in ft²
Two homes on one yardstick
HomePriceAreaPrice per ft²
A$412,0001,850 ft²$222.70
B$455,0002,100 ft²$216.67

Outside the US prices are per square metre. One foot is exactly 0.3048 m, so 1 m² = 10.7639104 ft². Multiply a per-ft² price by 10.7639 to get per m²: $222.70 per ft² is about $2,397 per m². Divide a per-m² price by 10.7639 to go the other way. A rounded 10.76 is fine for a house and drifts on a large area.

Comparing homes: whose square footage is it?

The footage in a listing is not the floor you could cover with flooring. The ANSI Z765 method for calculating a home's square footage measures from the outside of the exterior walls, including cladding. It counts finished area only, reports finished space below grade separately from above grade, and sets a minimum ceiling height so a sloped attic or a low bulkhead does not count in full (Home Innovation Research Labs). Not every listing follows it, so ask what method was used.

A floor plan with the listing outline drawn at the outside of the walls and the walkable floor shaded inside
Listing area is measured at the outside of the walls; the floor you can cover is smaller.

Before you trust a comparison, run through this:

  1. Same method. Both areas from the same standard, or both from an appraiser's drawing.
  2. Above grade only. Compare above-grade finished area with above-grade finished area. A finished basement is real space but sits in a different category.
  3. Garage and unfinished space out. If one number includes them and the other does not, the comparison is broken.
  4. Current measurements. An addition or a converted attic can make an old figure wrong.

My caution: price per square foot is a blunt tool. Smaller homes usually cost more per foot because a kitchen and a bathroom cost about the same in any size, and lot, location, layout and condition matter more than the ratio. Use it to spot outliers, not to decide.

Comparing flooring: shelf price is not floor price

The price on the shelf is per square foot of material. What you pay is per whole box, and what you cover is the floor, not the overage. Run the kitchen from the tile guide through all three ways. It is 150 ft² of floor, 165 ft² with overage, sold in 11 boxes that hold 176 ft², at a hypothetical $3.49 per ft².

One kitchen, three prices per square foot
BasisAreaCostPer ft² of floor
Shelf price on the area you need165 ft²$575.85$3.84
Whole boxes you pay for176 ft²$614.24$4.09
Measured floor at shelf price, no overage150 ft²$523.50$3.49

The real figure for tiling 150 ft² is $614.24, or $4.09 per ft² of floor. Two products can swap places once box size and overage are included, so compare their whole-box totals for your own area. Also separate material from installed price: a rate of $X per ft² "installed" bundles material, labour, prep and haul-away, and a rate "for labour" does not. Never compare the two directly.

To work out how many boxes a room takes, see how many tiles you need.

Comparing contractor quotes

The way quotes mislead is almost always the area, not the rate. One contractor measures the room, another measures the room plus the closet, a third bills the area with waste included. Put your own measured floor area next to each quote and divide.

Two hypothetical quotes for the same 150 ft² floor
QuoteRateArea billedTotalPer ft² of your 150 ft²
A$13.00 per ft²150 ft²$1,950.00$13.00
B$11.50 per ft²175 ft²$2,012.50$13.42

Quote B has the lower rate and the higher bill. Ask each contractor for the area they measured, the waste they assume and what is in the price: demolition, subfloor prep, materials, labour, trim and disposal. A written quote that lists those lines is much easier to compare than a single figure.

One price, three units

Shelf labels, farm quotes and overseas listings all use different area units. Convert the rate once, with exact factors, and compare in a single unit. A hypothetical tile at $3.49 per ft² reads like this:

The same rate in three units
Per ft²Per yd² (× 9)Per m² (× 10.7639104)
$3.49$31.41$37.57

Go the other way by dividing. A carpet advertised at $31.41 per yd² is $3.49 per ft², and a flooring price of $37.57 per m² is the same $3.49 per ft². Do the conversion before you compare, never after.

Pitfalls to watch

  • Garage and basement in or out. Confirm before you divide.
  • Per m² abroad. Convert with 10.7639, not 10.76, when the area is large.
  • Per yd² for carpet and sod. Divide by 9 to get per ft²: a hypothetical $4.50 per yd² is $0.50 per ft². See how much sod you need for how sod is sold.
  • Rounding early. Keep the cents until the end. $222.70 times 1,850 is $411,995, not $412,000.
  • Mixing basis. Material price against installed price, or price per ft² of tile against price per ft² of floor.

Quick answers

How do I calculate price per square foot?

Divide the total price by the area in square feet. For example, $412,000 for 1,850 ft² is $222.70 per ft². To go the other way, multiply the rate by the area.

How do I convert price per square foot to price per square metre?

Multiply by 10.7639, because 1 m² is 10.7639 ft². A price of $222.70 per ft² is about $2,397 per m². Divide by 10.7639 to convert back.

Is a lower price per square foot always the better deal?

No. The ratio ignores location, lot, condition and how the area was measured. Compare only prices and areas measured the same way, and use the figure to spot outliers.

Why is the listing's square footage bigger than my floor area?

Home square footage standards such as ANSI Z765 measure from the outside of the walls, so wall thickness, stairs and similar space is included, and the floor you can cover is smaller.

What is the price per square foot of flooring when I buy whole boxes?

Divide the cost of the whole boxes by the area you actually floor. For 150 ft² of tile bought as 11 boxes for $614.24, that is $4.09 per ft², not the shelf price.

Try the square foot calculator

More tips